Mitsubishi Software instructions:

There are two basic parts to using your Mitsubishi recorder (1)live view, and (2)playback.

(1) Live view

To view your cameras on your computer simply open your RASplus  icon on your desktop

Now click ok on the language selection.  English should be defaulted.  You will now get a screen similar to the picture below.  Three parts are important for live viewing of your cameras.

1.  Pressing this button will switch to a 4 channel view.  This will make your cameras larger and easier to see

2.  Now click on the camera site name you want to see.  Hold down the left mouse button and drag it over to the black camera layout.  If the Remote Site is not on your screen then click view...sites...remote sites.

3. select watch screen and your camera will appear in the four black boxes.

(2) Playback

Playback is very similar to live view.  Open the program, click ok on the language selection screen, and click on the 4 channel view button. 

Now click and drag the camera site you want to view over to the black camera boxes. 

This time choose search screen to view playback.  You will now use the panel at the bottom of your screen to control playback.  It has three main parts.

1. First select the date you want to view.  Make sure you click on the day you want.

2.  Now click on the pie chart to select the hour of the day you want to view.

3.  Once the date and time are selected you use these controls just like a VCR.  Make you you press stop before switching recording speed.  To go back to live view, go back to step one under live view.