How to add a card with EntraPass software:

Open your entrapass from the shortcut on your desktop.  If there is no shortcut then go to your start menu...programs...entrapass...workstation.

1.  Press the login button and enter your username and password.

2. Now click on the Users tab along the top of the program.  Click the Card button.

3.  The card window will now open.  Here you can modify cards, or add new cards.  The procedure for each is virtually the same.  The only difference is with a new card you must enter the PIN on the card and press enter.  To modify an existing card use the up and down arrows next to the card number entry box.

4.  Click on the access level tab toward the middle of the window and assign the card an access level with the pull down menu.  (If this pull down menu is not available you need to click in the card number box and press enter).

5.  If this is a permanent card then skip to step 6.  Otherwise click on the miscellaneous tab.  Now assign the card an end date by clicking the "USE END DATE" check box and choosing a date. 

6.  After you are sure you have entered all of the information correct, press the save button.      This will send the information to the door.  You can click the new button   to enter a new card or press close to exit the card entry window.

7.  The last step is to make sure communications were successful.  This is a precautionary step.  Click  the Desktop tab along the top of the screen and click desktop 1.  This will show all changes made to the system.  It should have a successful card modification entry at the bottom and list the card number you added/modified. You can now log out of the program.